Soaker Hose Depot Contact Us

Welcome to the Online home of Environmentally Friendly Products

    - Drip  
   Irrigation

 -
Factory
   Direct 

 - Sold by
    the pallet


 
- Sold by the
    Container

 - Sold by the  
   Truck Load

 

 

REGULATORS   FILTERS   ACCESSORIES

 

PayPal Acceptance Mark

 
   

 

#104 Brass Backflow Preventer:

Anti-Siphon device keeps contaminated water from backing up into your main water supply. Male x female hose thread. Simply attach to your faucet before adding your irrigation system.

#106 Plastic Backflow Preventer:

Anti-Siphon device keeps contaminated water from backing up into your main water supply. Male x female hose thread. Simply attach to your faucet before adding your irrigation system.

 $9.99 ea. 
 $7.99 ea.

 

#105 Soaker Hose Pressure  Regulator

(male x female hose thread)

Genuine Fiskars brand soaker hose pressure regulator reduces the pressure entering your system to the recommended operating pressure of the drip/micro sprinkler or soaker hose system that you are using. That pressure should be around 20-30 psi. The pressure of your system is VERY IMPORTANT, especially with soaker hose and knowing which regulator to get. Regulators can only take so much pressure, coming in to them. If your pressure exceeds this psi, and you purchase the wrong regulator, it will cause it to malfunction and water will come out a little hole on the side of the regulator. The pressure regulator will no longer work if this happens. Know your pressure!

#107 200 Mesh Tee Filter:

(male x female hose thread)

Tee Filter has Female Hose swivel on the inlet for attaching to a faucet or end of a hose, Male Hose thread on the outlet to connect to your hose/drip system or soaker hose. It has an easy to remove (Hose cap) with a 200 mesh stainless steel screen. Unscrew the cap to easily clean the filter inside.

 

 

 

 

 

 $14.99 ea.
 $14.99 ea. 

 

#108 200 Mesh Wye Filter (male x female hose thread)

Wye Filter has more surface area that the T-filer and requires less cleaning. It has Female Hose swivel on the inlet for attaching to a faucet or end of a hose, Male Hose thread on outlet. The body unscrews to clean the 200 mesh stainless steel filter. Hand tighten to make a water tight seal.

 #143 Calcium Filter: (male x female hose thread)

Our Calcium Filter can be used for soaker hose, drip irrigation and mist systems to help reduce clogging by capturing iron and calcium particles that build up in soaker hoses and in drip emitters. Unit is male x female garden hose thread and easy installs into garden hose fittings. Depending on water usage, average life is approximately 1 year.

 $19.99 ea. 
 $29.99 ea. 

 

#650 Brass Adjustable Pressure Regulator and Gauge.

Lead Free! Adjustment knob, makes it easy to precisely dial in the desired system pressure. Brass body make it's durable and long lasting. Perfect for hard to control pressure on irrigation systems, even RV's. MAY BE LEFT UNDER PRESSURE!

Maximum inlet pressure: 160 PSI.

Outlet adjustable: 5-50 PSI.

Maintains selected pressure for circuits totaling 5-250 GPH.

Inlet: 3/4" Female Hose Thread Swivel.

Outlet: 3/4" Male Hose Thread.

 #91130 Pressure Gauge 

Know your pressure so you are sure of which pressure regulator is right for you. Female hose thread, 200 psi pressure gauge will let you test the pressure of your water coming out of your faucet, up to 200 psi. It includes hose washer with 3/4-inch fht inlet with plastic lens. It is compatible with all standard 3/4-inch faucets and hoses.

 
 $50.00 ea. 
 $14.99 ea.

 

#490 1/4" Plastic "C" Stakes:

1/4" 'C' - Hook Stakes are used to secure 1/4" tubing or soaker hose in a position near the plant area, or to secure 1/4" micro tubing with a drip emitter within a box or basket. Constructed of UV-resistant high impact plastic measuring 4" in length.

#16056 1/4" Metal Stakes:

Galvanized steel stakes are used to hold the 1/4" micro drip tubing.

 

 

Package of 100    $10.99  

Package of 100      $12.99

 

#492 J Style Metal Stakes

Galvanized steel stakes used to hold 1/2" drip tubing and sizes up to 820 od soaker hose or poly tubing.

#129 1/2" Plastic Stakes  (can not be used with .820)

1/2" Plastic Stakes have an exclusive cleated design to hold lines securely in place. Measures 6-inches in height. Holds tubing sizes up to .700 od soaker hose (red stripe) and poly tubing in place.

Package of 100   $19.99

Package of 25  $12.95   Box of 100  $44.00  
Quantities

 

Flow Disc: Usually installed on soaker hose lengths 50' - 250'.
This helps ensure a more equal water distribution from end to end.
You would use a flow disc when you are receiving more water at the beginning of your soaker hose run.

Install on the female hose end of your soaker hose system, by removing garden hose washer and replacing with flow disc.
Available in different sizes for different lengths of soaker hose
1/2 GPM 50' - 99' runs (blue disc)
1 GPM 100' - 199' runs (green disc)
2 GPM 200' - 250' (white disc)

#131˝ gph

(2 pack) $1.99

#132 1 gph

(2 pack) $1.99

#133 2 gph

(2 pack) $1.99

#130 Variety Pack

(2 of ea. size) $5.99

 

 

#PTC1 Tubing Cutter:

Cuts tubing 1/2" to 1-5/8" (not for pvc)

#FV Flush Valve with 3/4'' FHT:

(Automatically flushes drip soaker hose lines each time the system is shut off. Helps prevent freezing in cold climates.)

Quantity 1  $14.99

Quantity 1  $2.99 ea.

 

 

#472 Pocket Punch:

Great little pocket tool, not only punches holes, but also has a place to put your barbed fitting or emitters on the end of it for easy insertion. Also a 1/4" tubing guide. The notch at the top will help in removing barbed fittings and emitters. Item is approx. 5" long. Use on tubing up to .710.

#473 Punch N Cut:

The Punch N Cut does everything the Pocket Punch does, plus a little more. Use for cutting your poly tubing or soaker hose, up to size .940. Item is approx 10" long.

 

Quantity 1  $10.99 

Quantity 1  19.99

 

#470 Plastic Punch Tool:

Use to punch holes in main line poly tubing for installing 1/4" fittings and drippers.
All plastic punch, is great for those small jobs!

#471 Professional Punch Tool:

Use to punch holes in main line poly tubing for installing 1/4" fittings and drippers. Features include: Metal tip and easy grip plastic handle.

$.99 ea.

$2.99 ea.

 

#HSTHM Female Hose Thread x Male Hose Thread Tee. Use on the end of a faucet as you would a hose wye. Female swivel makes it easy to take on and off. Made of plastic.

 

 
$2.99 ea.
 

 

 
 

This site is designed and maintained by Soaker Hose Depot. 
   Any questions or comments regarding this site, please contact sales@soakerhosedepot.com
     Copyright© 2014  Soaker Hose Depot , All rights Reserved