Rain Barrel Soaker Hose (3/8")

Rain Barrel Soaker Hose is specially formulated to work with any rain barrel or other gravity fed system. It is a low flow, high output soaker hose that allows maximum output for flower and other garden areas. Rain Barrel Soaker Hose is the prefect vehicle for any of you working with a gravity irrigation system. Lengths are normally run in 50'-75' in one piece. Tip: Whenever you can always try and make a "loop" this great increases an even flow. Rain Barrel Soaker Hose can be identified by it's purple stripe. Use the 580 compression to easily create your own custom soaker hose system. Flow rates will vary, depending on the size of your water container and the elevation of it. You must use a 200 mesh filter to keep the foreign material in your barrel (bugs, roofing particles, dust, debris) from clogging the soaker hose.

Remember DO NOT connect Rain Barrel Soaker Hose to a faucet, this may cause spraying and damage to the hose. You do not need a pressure regulator, or flow disc for Rain Barrel Soaker Hose.

Check out this video from a customer,  he used a closed loop on his design.

Article from Mother Earth News:
A Better Rainwater/Harvesting System

Products (Total Items: 5)
#191 - 100' Bulk Rain Barrel Soaker Hose
In Stock.
#192 - Bulk Rain Barrel Soaker Hose, 500'
In Stock.